门窗扇及门窗玻璃的安装(1)门窗扇和门窗玻璃应在洞口墙体表面装饰完工验收后安装。(2)推拉门窗在门窗框安装固定后，将配好玻璃的门窗扇整体安入框内滑槽，调整好与扇的缝隙即可。(3)平开门窗在框与扇格架组装上墙、安装固定好后再安玻璃，即先调整好框与扇的缝隙，再将玻璃安入扇并调整好位置，最后镶嵌密封条及密封胶。(4)地弹簧门地变电阻柜 精密铸造 中频电炉设备 保定断桥铝门窗 保定养老院 镜子批发 启闭机应在门框及地弹簧主机入地安装固定后再安门扇。先将玻璃嵌入门扇格架并一起入框就位，调整好框扇缝隙，最后填嵌门扇玻璃的密封条及密封胶。
Installation of door and window sashes and glass (1) the door and window sashes and glass shall be installed after the completion of decoration and acceptance of the wall surface of the opening. (2) After the sliding door and window are installed and fixed in the door and window frame, install the door and window sash with glass into the sliding slot in the frame, and adjust the gap with the sash. (3) Open the door and window horizontally, assemble the frame and sash frame on the wall, install and fix them before installing the glass, that is, adjust the gap between the frame and sash first, then install the glass into the sash and adjust the position, and finally inlay the sealing strip and sealant. (4) The floor spring door shall be installed and fixed after the door frame and the floor spring host are installed and fixed. First, insert the glass into the door leaf grid and put it into the frame together, adjust the gap between the frame and the leaf, and finally fill in the sealing strip and sealant of the door leaf glass.